Beams and mixing pit concrete lids

Anders Beton supplies various beams for use in cattle barns. The beams can be used under our driveable floor elements.

Benefits of beams
  • Standard sizes easily available from stock
  • Available up to 400 cm length
  • Always provided with basket reinforcement
BEAM DRIVEABLE BY TRACTOR TYPE 3220.000
ARTICLE LENGTH WIDTH HEIGHT WEIGHT

Beams for under driveable slats for tractor load with 4 ton axle load, trach width 180 cm, axle distance 180 cm and wheel print 30x40cm

3220.140 140 20 30 196 kg
3220.200 200 20 30 280 kg
3220.225 225 20 30 315 kg
3220.240 240 20 30 336 kg
3220.250 250 20 30 350 kg
3220.310 310 20 30 434 kg
Support: see processing conditions

Hammer piece 50 x 20 x 20 available type 2020.050

BEAM DRIVEABLE BY TRUCK TYPE 3025.000
ARTICLE LENGTH WIDTH HEIGHT WEIGHT

Beams for under driveable slats and T-Floors with:
- driving axle load 12 tons - track width 200 cm
- axle distance 120 cm - wheel print 40x40cm
- tilt position axle load 15 tons - track width 200 cm
- axle distance 200 cm - wheel print 40x40cm

3025.200 200 25 30 350 kg
3025.240 240 25 30 420 kg
3025.250 250 25 30 437 kg
3025.300 300 25 30 525 kg
Support: see processing conditions

Hammer piece 50 x 20 x 20 available type 2020.050

 

BEAM DRIVEABLE BY TRACTOR TYPE 3320.000*
ARTICLE LENGTH WIDTH HEIGHT WEIGHT

Beams for under driveable slats for tractor load with 4 ton axle load, track width 180 cm, axle distance 180 cm and wheel print 30x40cm

3320.000 from 355 to 600 20 30 144 kg/lm
Support: see processing conditions

* Attention: these beams must be supported in the middle.

BEAM DRIVEABLE BY TRUCK TYPE 3125.000*
ARTICLE LENGTH WIDTH HEIGHT WEIGHT

Beams for under driveable slats and T-Floors with:
- driving axle load 12 tons - track width 200 cm - axle distance 120 cm - wheel print 40x40cm
- tilt position axle load 15 tons - track width 200 cm - axle distance 200 cm - wheel print 40x40cm

3125.000 from 355 to 600 25 30 180 kg/lm
Support: see processing conditions

* Attention: these beams must be supported in the middle.

MIXING PIT CONCRETE LID
ARTICLE LENGTH WIDTH HEIGHT WEIGHT

Axle load: 10 ton

Z1001.120A 120 50 20 288 kg
Z1001.120B 120 50 20 266 kg
Support: see processing conditions

Mixing pit lid type A = without hole, type B = with large hole on the right

Mixput Deksel A
Mixput Deksel B
Omschrijving Type
General conditions of sale Sales Conditions Download
AB Cattle Brochure English Folders Download