End panels
Anders Beton supplies three types of end panels for use in cattle barns. As an L-wall, as wall with rebars and finally as precast end panel with base for deep litter cubicle bed. Each type has its specific advantages.
Benefits of end panels
- 3 versions available
- Available with bevelling for a good overview
- Applicable in combination with material to cast upon
- Ready for placement
Information end panels
End panel Type 8.603.000 with base without bevelling |
||||
| LENGTH | WIDTH | HEIGHT | WEIGHT | REF. NUMBER |
|---|---|---|---|---|
| from 200 through 300 cm ascending per 5 cm |
12 | 165 | 554 kg/m | 8.603.200 to 8.603.300 |
End panel Type 8.503.000 with rebars with/without bevelling |
||||
| LENGTH | WIDTH | HEIGHT | WEIGHT | REF. NUMBER |
|---|---|---|---|---|
| from 150 through 300 cm ascending per 5 cm |
14 | 165 | 555 kg/lm | 8.503.150 to 8.503.300 |
Other versions of end panels are available on request
End panel Type 8.703.000 with base for deep litter cubicle bed with/without bevelling |
||||
| LENGTH | WIDTH | HEIGHT | WEIGHT | REF. NUMBER |
|---|---|---|---|---|
| from 220 through 300 cm ascending per 10 cm |
14 | 165 | 748 kg/lm | 8.703.220 to 8.703.300 |
Other versions of end panels are available on request
